Reference
The pallet glossary
Pallet terms, defined the way they are actually used on a dock rather than the way they appear in a standards document, from construction and grading to treatment and pooling.
Need pallets sourced?
Send a free, no-obligation quote request. A partner supplier in our network follows up on the details.
Most-looked-up terms
Stringer — the board on edge running the length of a pallet. GMA — the 48x40 North American standard. Core — a used pallet bought for reprocessing. HT — heat treated to 56°C core for 30 minutes, required for export. Companion stringer — a second stringer nailed alongside a cracked one.
A to Z
Every term
A
- Anti-skid
- Adhesive strips, coating or friction paper applied to a pallet deck to stop a load sliding in transit.
- AS/RS
- Automated Storage and Retrieval System. Robotic racking that is unforgiving about pallet height variance and squareness, which is why it often specifies tight tolerances or Grade A.
B
- Bearer
- British term for a stringer — the structural member running the length of the pallet.
- Block pallet
- A pallet built on nine solid blocks rather than stringers, giving true four-way entry for forklifts and pallet jacks alike.
- Board foot
- A lumber volume unit: 144 cubic inches, nominally 12 x 12 x 1 inches. Reclaimed lumber is usually sold by the board foot.
- Butted deck board
- Deck boards placed edge to edge with no gap, producing a solid deck. Heavier, stronger and more expensive.
C
- Chamfer
- A bevelled edge cut on bottom deck boards so a pallet jack rolls on rather than catching. Cheap to do, expensive to omit.
- CHEP
- A global pallet pooling company whose blue 48x40 block pallets remain its property. They are never yours to sell.
- Combo load
- A deliberate blend of Grade A and Grade B pallets in an agreed proportion, priced between the two.
- Companion stringer
- A second full-length stringer nailed alongside a cracked one. The most common pallet repair; restores rated capacity and drops the pallet to Grade B.
- Core
- A used pallet bought for reprocessing. Cores are the raw material of the recycled pallet market.
- Corner board
- Laminated paper angle placed at the vertical corners of a unit load to spread banding pressure and prevent strap cut-in.
- CP pallet
- Chemical industry standard pallets, CP1 through CP9, each a defined footprint and construction used across European chemical logistics.
- Cross member
- A board running perpendicular to the stringers, adding stiffness to a deck.
D
- Deck board
- The boards forming the top or bottom surface of a pallet. Typically 5/8 inch nominal on a GMA pallet.
- Deckboard spacing
- The gap between deck boards. Wider spacing saves weight and cost but lets small cartons fall through.
- Double-face pallet
- A pallet with both top and bottom decks, as opposed to a skid, which has no bottom deck.
- Double-wing pallet
- A pallet whose deck boards overhang the stringers on both sides, giving extra deck area for sling handling.
- Dunnage
- Loose wood used to brace, block and protect cargo inside a container or rail car. Solid wood dunnage falls under ISPM 15.
- Dynamic load
- The maximum weight a pallet can carry while being moved by a forklift. Lower than the static rating.
E
- Edge racking
- Supporting a pallet only at its two ends across a rack bay, with nothing underneath. The lowest of the three load ratings.
- EPAL
- European Pallet Association, which licenses production and repair of the 1200x800 Euro pallet and controls its quality standard.
- EUR pallet
- The 1200 x 800 mm European standard pallet. Block-built on nine blocks with eleven boards and 78 nails in specified positions.
- Export pallet
- A pallet intended for international shipment and therefore requiring ISPM 15 heat treatment and marking.
F
- Fastener
- The nail or staple joining pallet components. Helical and screw-shank nails hold better against withdrawal than smooth-shank.
- Flush pallet
- A pallet whose deck boards end flush with the stringer ends, with no overhang or wing.
- Four-way entry
- A pallet that admits forklift tines from all four faces. On a notched stringer pallet this applies to forklifts only, not pallet jacks.
G
- GMA pallet
- The 48x40 inch stringer pallet standardised by the Grocery Manufacturers Association. The most widely used pallet footprint in North America.
- Grade A
- A recycled pallet that is square, clean and free of visible repairs. Priced above Grade B for appearance, not strength.
- Grade B
- A structurally sound recycled pallet carrying visible repairs such as companion stringers or replaced boards.
- Green lumber
- Freshly sawn, undried lumber. Cheaper and heavier; it will shrink, and shrinkage loosens nails.
H
- Hardwood
- Timber from deciduous species — oak, maple, ash. Heavier and stronger than pine; prized in reclaimed lumber.
- Heat treatment (HT)
- Raising wood to a 56°C core temperature for 30 continuous minutes to kill pests. Required by ISPM 15 for export.
- Helical nail
- A nail with a spiral shank that rotates as it is driven, dramatically improving withdrawal resistance.
I
- IPPC mark
- The stamp showing ISPM 15 treatment, carrying a country code, producer number and treatment code.
- ISPM 15
- International Standard for Phytosanitary Measures No. 15, governing treatment and marking of solid wood packaging in international trade.
K
- Kiln dried (KD)
- Wood dried in a controlled chamber to a target moisture content, often 19% or below. A quality process, not a compliance one.
- KD-HT
- Both kiln dried and heat treated. What moisture-sensitive export shipments actually need.
L
- Lead board
- The outermost deck boards at each end of a pallet. They take fork impact and are the most frequently replaced component.
M
- MB
- Methyl bromide fumigation, an alternative ISPM 15 treatment being phased out globally as an ozone-depleting substance.
- Moisture content
- The proportion of water in wood by dry weight. The higher it is, the greater the mould risk in enclosed transit.
N
- Nestable pallet
- A moulded plastic pallet with a hollow bottom that stacks into itself for efficient return transport. Not rackable.
- Notch
- A cutout in a stringer face, typically 9 inches by 1.5 inches, admitting forklift tines from the long sides.
O
- Overhang
- Load extending beyond the pallet footprint. Reduces carton compression strength and is a leading cause of transit damage.
P
- Pallet jack
- A manual or powered device with wheels that roll under a pallet. Requires true four-way entry — notches are not enough.
- Pallet pool
- A rental system in which pallets remain the property of a pooling company and circulate between participants.
- PECO
- A North American pallet pooling company. Its red pallets, like CHEP blue, remain the pooler's property.
- Partial four-way
- A stringer pallet with notches: four-way for forklifts, two-way for pallet jacks. The GMA standard.
- Plug
- A fitted block filling damage in a stringer. Acceptable for many applications; always grades the pallet B or below.
R
- Racking load
- The maximum weight a pallet can support spanning rack beams without deck support. The lowest of the three ratings.
- Reclaimed lumber
- De-nailed, sorted boards and stringers salvaged from pallets beyond repair, sold for furniture, crating and construction.
- Remanufactured pallet
- A pallet newly assembled from components salvaged out of several other pallets.
- Reversible pallet
- A pallet with identical top and bottom decks, usable either way up.
- Rocker
- A pallet that does not sit flat on all four corners. Twist is a rejection at any grade.
- Runner
- A longitudinal support member, particularly on a skid where there is no bottom deck.
S
- Screw-shank nail
- A nail with a threaded shank giving high withdrawal resistance. Standard on well-built pallets.
- Single-face pallet
- A pallet with a top deck only — effectively a skid.
- Skid
- A pallet without a bottom deck. Used for machinery, where nothing should catch underneath.
- Slip sheet
- A thin kraft or HDPE sheet handled by a push-pull attachment, eliminating the pallet entirely from a unit load.
- Softwood
- Timber from coniferous species, principally southern yellow pine in North American pallets. Lighter and cheaper than hardwood.
- Southern yellow pine
- The dominant species in North American pallet production. Strong for its weight, widely available and fast growing.
- Static load
- The maximum weight a pallet can support resting on a flat floor. The highest of the three ratings and the least useful.
- Stretch film
- Plastic film wound around a unit load to unitise it. Should be wrapped to the pallet, not just around the load.
- Stringer
- A board on edge running the length of a pallet and carrying the deck. Three is standard on a 48x40.
- Stringer board
- On a block pallet, the board connecting the blocks in one direction — the equivalent structural member to a stringer.
T
- Teardown
- Dismantling a pallet beyond repair to salvage its components for reclaimed lumber or remanufacture.
- Toll repair
- Repairing a customer's own pallets and returning them, rather than exchanging them for stock.
- Top cap
- A flat lid placed over a collared or wrapped load so units can be stacked in a trailer.
- Two-way entry
- A pallet that admits forks from two opposing faces only. Cheaper and stronger than a notched equivalent.
U
- Unit load
- The pallet plus everything on it, treated as one handling unit. Stability is a property of the whole, not the pallet.
W
- Wing pallet
- A pallet whose deck boards overhang the stringers, creating wings for sling or bar handling.
- Withdrawal resistance
- The force required to pull a fastener out of wood. The single most underrated variable in pallet service life.
- Wire deck
- Mesh decking fitted to rack beams. Transfers load into the rack structure and effectively removes the pallet's racking limit as a constraint.
Confusions
Pairs of words people mix up
| This | Is not this | The difference |
|---|---|---|
| Heat treated (HT) | Kiln dried (KD) | HT kills pests at 56°C core; KD removes moisture. A pallet can be one without the other. |
| Recycled | Remanufactured | Recycled is an original pallet inspected and repaired. Remanufactured is newly built from parts of several. |
| GMA | CHEP | GMA is a footprint and construction standard. CHEP is a pooling company whose pallets remain its property. |
| Four-way | Pallet-jack accessible | A notched stringer pallet is four-way for forklifts and two-way for jacks. |
| Static load | Racking load | Racking capacity is typically much lower. Confusing them causes rack-level failures. |
| Stringer | Stringer board | A stringer is a board on edge carrying the deck. A stringer board connects blocks on a block pallet. |
| Recovery rate | Recycling rate | Recovery includes energy recovery. Recycling means returned to a product stream. |
| Grade | Load rating | Grade describes appearance and permitted repairs. It is not a strength statement. |
| Overhang | Underhang | Overhang costs carton strength; underhang wastes cube and lets loads shift. |
| Skid | Pallet | A skid has no bottom deck. Used for machinery that is bolted down and dragged. |
| EUR | EPAL | EUR was the older railway-administered mark; EPAL is the current licensing body. Same 1200x800 spec. |
| Dunnage | Packaging | Dunnage is loose bracing inside a container — and it falls under ISPM 15 exactly like a pallet. |
By subject
Where each group of terms is explained in depth
| Subject | Example terms | Explained in depth |
|---|---|---|
| Construction | Stringer, block, notch, deck board, chamfer | Block vs stringer |
| Dimensions | GMA, EUR/EPAL, ISO, footprint, deck coverage | Pallet size chart |
| Load | Static, dynamic, racking, bending moment, wire deck | Load capacity guide |
| Grading | Grade A/B, companion stringer, plug, combo, twist | Grades explained |
| Inspection | Notch split, withdrawal, square, spot metering | How pallets are inspected |
| Compliance | ISPM 15, IPPC, HT, MB, DB, thermocouple | Heat treatment |
| Materials | SYP, hardwood, board foot, de-nailing, nail shadow | Reclaimed lumber |
| Unit loads | Collar, top cap, slip sheet, corner board, interleaf | Collars & accessories |
| Commercial | Core, lot price, backhaul, break point | Pricing guide |
| Sustainability | Reuse, recycling route, embodied carbon | Sustainability |
Questions
Common questions
What is a stringer on a pallet?
The board on edge running the length of a pallet, supporting the deck boards. In British usage it is called a bearer.
What does GMA pallet mean?
The 48x40 inch North American standard pallet, named after the Grocery Manufacturers Association. See 48x40 GMA.
What is a core in the pallet industry?
A used pallet bought for reprocessing. Cores are the raw material of the recycled pallet market, and their price drives the price of recycled stock.
What does the HT stamp on a pallet mean?
Heat treated to a 56°C core temperature for 30 minutes under ISPM 15, which is required for most export shipments. HT vs KD.
What is a companion stringer repair?
A second full-length stringer nailed alongside a cracked one. It restores rated capacity and is the most common pallet repair, dropping the pallet to Grade B.
Need pallets, not just definitions?
Send a free, no-obligation quote request and a partner supplier in our network will follow up.