Guide · Pillar
The pallet recycling guide
Everything that can happen to a pallet between the moment it stops being useful to you and the moment its wood stops existing. It is a longer story than most people expect, and the grinder is right at the end of it.
Start a quote
Tell us the footprint, grade and volume. A partner supplier follows up with a quote.
Short answer
Pallet recycling follows a six-step cascade: reuse as-is, repair, remanufacture, reclaim as lumber, grind into mulch, and finally energy recovery. A good recycler works from the top of that list and only descends when nothing better is possible. Whether a load is bought, collected for free or carries a fee depends on its condition and the partner supplier that quotes it.

Recycling ≠ shredding
Grinding is near the bottom of the cascade. A sound pallet is worth more as a pallet than as mulch.
Condition decides the outcome
Reusable cores have market value. Broken, wet or contaminated loads are worth less and may carry a fee. Pricing is by quote from a partner supplier.
Ask for the method
Any recovery claim should come with a stated method. How to read one →
Why pallets are among the best-recycled packaging materials
Wooden pallets are recovered at high rates compared with most packaging, and almost nobody notices, because pallet recycling happens inside the freight system where consumers never see it.
The reason is economics, not virtue. A used pallet is worth money. A used yoghurt pot is not. When the material has residual value, recovery infrastructure appears without needing to be mandated.
The six-step cascade
The governing principle is to find the highest-value remaining use, not the easiest one. Every step down the cascade destroys options, so a well-run recycler works from the top.
1. Reuse as-is
Sound, square, complete. Inspected, graded, stacked, resold. No processing beyond handling. This is the cheapest outcome for everybody and the best one environmentally: reusing a pallet avoids building a new one, and the wood already in circulation gets another service life.
2. Repair
One or two failures, such as a cracked stringer, a missing board or backed-out nails. A repair bench restores rated capacity. The pallet re-enters service as Grade B. How repair works →
3. Remanufacture
Too damaged to repair economically, but full of sound components. Dismantled, components sorted, and a new pallet assembled from the pool. The output is a remanufactured pallet built largely from salvaged wood.
4. Reclaim as lumber
Components that cannot make a pallet can still make something. De-nailed deck boards and stringers become reclaimed lumber, crate stock, furniture material and dunnage.
5. Grind to mulch
Wood that cannot be a board, such as split ends, de-nailing offcuts and planer waste, is ground, magnet-separated and screened into landscape mulch and animal bedding.
6. Energy recovery
Fines, heavily nail-contaminated material and anything with residual coating can go to a permitted biomass facility as boiler fuel. This is the only step where the carbon stored in the wood is released, which is why it should be reported separately from recycling rather than folded into it.
What cannot be recycled
- MB-stamped pallets. Methyl bromide fumigated. They should not enter any reuse stream.
- Chemically contaminated pallets. Spills, oil saturation, unidentified residue.
- Mouldy pallets. Visible growth is a rejection, not a cleaning job.
- Flood-exposed pallets. Standing water carries contaminants of unknown type.
- Pressure-treated lumber. CCA and ACQ treated wood should not go into mulch or biomass streams.
Painted pallets and pallets with adhesive residue may be accepted by some recyclers but typically bypass the reuse steps and go straight to reclaim or grind.
How recovery is measured, and how to check a claim
A recycler that weighs loads inbound and outbound can calculate a recovery rate: outbound recovered tonnage divided by inbound tonnage. It is simple arithmetic and it is auditable.
When a supplier quotes a recovery rate, ask three questions. Is energy recovery counted as recycling? (It should be reported separately.) Is the figure by weight or by unit count? (Weight is the honest measure.) Can you see the weigh tickets? (If not, the number is marketing.)
Starting a request
Most recycling relationships begin with a single cleanout. Count what you have, photograph it, and request a quote. We pass the request to partner suppliers in our network, and one follows up with you. If you generate pallets regularly, mention it, because a recurring pickup is a different conversation from a one-off.
The one thing worth doing before you ask anyone: separate footprints. A stack of sorted 48x40 is worth more per unit than the same pallets mixed with everything else, because the sorting cost moves from the recycler to you, and it takes your team an hour.
At a glance
- Step 1Reuse as-is
- Step 2Repair
- Step 3Remanufacture
- Step 4Reclaim as lumber
- Step 5Grind to mulch
- Step 6Energy recovery

Next steps
Reference
Reference table
| Destination | Becomes | Value order | Reversible? |
|---|---|---|---|
| Reuse as-is | Graded pallets | 1 — highest | Yes, many times |
| Repair | Grade B pallets | 2 | Yes |
| Remanufacture | Rebuilt pallets | 3 | Yes |
| Reclaim as lumber | Boards, stringers, crate stock | 4 | Partly |
| Grind to mulch | Landscape mulch, bedding | 5 | No |
| Energy recovery | Boiler fuel | 6 — lowest | No |
Applications
Where this gets used
Single-site cleanout
Most recycling relationships start here. One request, one partner supplier, one collection.
Recurring generation
Sites that generate pallets every week can ask about a standing pickup instead of repeated cleanouts.
Construction and project waste
High one-way inbound with no storage. Describe the access and timing in the request.
Sustainability reporting
Ask the partner supplier what records it can provide: weigh tickets, material routes and a stated method.
The bigger picture
Why pallets are recovered more than most packaging
Wooden pallets are recovered at high rates compared with most packaging materials, and almost nobody knows it, because pallet recycling happens inside the freight system where consumers never see it.
The reason is economics, not virtue
A used pallet is worth money. A used yoghurt pot is not. When a material has residual value, recovery infrastructure appears without needing to be mandated: collectors appear, sorting appears, and a market sets the price.
This is worth understanding because it tells you what to look for in a recycler. A recycler whose economics depend on a gate fee behaves differently from one whose economics depend on selling recovered product.
Why the cascade order matters so much
Every step down the cascade destroys options. A board ground into mulch cannot become a crate panel. A pallet torn down cannot be repaired. So the discipline is to work from the top and descend only when nothing better is available.
It costs more in labour than shredding everything would. It also produces several revenue streams rather than one, which is what makes it commercially durable rather than dependent on goodwill.
What a landfill claim does and does not mean
Be careful with absolute claims. Some material is always left over, such as fines, and some goes to energy recovery rather than back into products. Energy recovery is diverted from landfill and it is not recycling, so it should be reported separately.
If a supplier claims nothing goes to landfill, ask where the fines go. There are always fines.
Contamination is the real limit
Damage is repairable; a chemical spill is not. Most of what a recycler turns away is contamination rather than damage.
The rejection list is short: MB-stamped pallets, chemically contaminated stock, visible mould, flood-exposed pallets and pressure-treated lumber. Painted pallets and adhesive residue may be accepted by some recyclers but bypass reuse entirely.
Sorting at source is the single biggest lever
Separating footprints before collection moves the sorting cost from the recycler's dock to yours, and it is usually quick work for a team that knows its stock.
You do not need to grade; the buyer does that. Just separate 48x40 from everything else.
Reporting that survives an audit
Weight, not unit count. Energy recovery reported separately. Weigh tickets available for any load. A published method for any carbon figure. A stated boundary: which sites, which streams, which period.
If a supplier cannot supply all five, the number they are giving you is marketing rather than data, and that becomes your problem at audit rather than theirs.

Process
How it runs, step by step
Count and photograph
Stack front, stack side, one typical pallet, and the dock the truck will use.
Separate what is not yours
Pooled pallets (CHEP, PECO, iGPS) remain the pooler's property and cannot be sold or disposed of.
Sort by footprint
One quick job that makes the load easier to quote and place.
Describe the load honestly
Dry or wet, reusable or broken. Condition decides whether a load is bought, collected or charged for.
Ask what records come with it
Weigh tickets, material routes and method. Ask before the first load, because the records cannot be reconstructed later.
Decision rules
If this, then that
- If your load is mostly reusable coresThen expect a partner supplier to quote to buy them.
- If your load is predominantly broken or wetThen expect a lot price or a service fee, which should be quoted before anything is dispatched.
- If you generate pallets every weekThen ask about a standing pickup; it removes scheduling and helps keep cores dry.
- If anybody in your business reports Scope 3Then ask what records the supplier provides before the first load.
Avoid
Common mistakes
Assuming recycling means shredding
Grinding is near the bottom of the cascade. Sound pallets go back to work as pallets.
Quoting a recovery rate by unit count
It can flatter, because the pallets that cannot be reused are the heavy ones.
Counting energy recovery as recycling
It is diverted from landfill and it is not recycled. Report it on its own line.
Storing cores outdoors
Wet pallets weigh more and are worth less. Covered staging pays back.
Terms
Vocabulary for this page
- Recovery rate
- The proportion of material removed from service that is collected rather than landfilled.
- Diversion rate
- Recovered tonnage divided by received tonnage, by weight. The honest basis.
- Disposition route
- Where a given tonnage actually went. Auditors want the split, not a single blended percentage.
- Cascade
- The ordered sequence of recovery options worked from highest value downward.
- Contamination
- Chemical, biological or coating residue that removes a pallet from every reuse and reclaim stream.
- Boundary
- Which sites, streams and period a reported figure covers. The most common source of year-over-year inconsistency.
The wider reference is in the pallet glossary.
Questions
Before you order
How much of a pallet can actually be recycled?
Most of it. Sound pallets are reused or repaired, damaged ones are remanufactured or reclaimed as lumber, and only wood that cannot be a board goes to mulch or fuel. Contaminated wood is the real limit.
Is pallet recycling free?
It depends on the load. Reusable cores have market value, so a recycler may buy them. Loads that are predominantly broken, wet or contaminated may carry a fee. Pricing is by quote from a partner supplier.
Why are pallets recovered so often compared with other packaging?
Residual value. A used pallet can be resold, repaired or reclaimed, so collectors and recyclers have a reason to take it. The driver is economics rather than regulation.
Can I recycle just a few pallets?
You can ask. Small quantities are harder to collect economically, so availability depends on partner suppliers near you. Request a quote and describe what you have.
Do recyclers pay for pallets or charge for them?
Both happen. Reusable cores have market value and are bought; loads that are predominantly broken, wet or contaminated may attract a service fee. The important thing is knowing which before a truck is dispatched.
What is the difference between recovery and recycling?
Recovery is everything collected rather than landfilled, including energy recovery. Recycling is material returned to a product stream. Conflating them inflates reported performance.
Can pallet recycling be certified?
Do not assume there is one pallet-specific certificate. What matters is evidence: weigh tickets, a documented method and a stated boundary. Ask the partner supplier what it can provide.
Ready to put a number on it?
Send the footprint, the grade and the volume. We'll come back with price per unit and the first window we can hold.