Plastic pallets are the right answer for some operations and the wrong answer for many more. Both conclusions come from the same arithmetic, applied to different situations.
The three numbers
Unit cost. A rackable HDPE pallet costs a multiple of a recycled wooden pallet of the same footprint. Exact figures vary by style, supplier and whether reclaimed stock is available, so get quotes.
Embodied impact. Making a new plastic pallet is more resource-intensive than making a new wooden one. Published life-cycle studies differ, so treat any single figure with caution, but the direction is consistent and it is the gap that people quoting "plastic is reusable therefore green" have usually not looked at.
Service life. A wooden pallet in open distribution makes a handful of trips before it disappears. A plastic pallet in a genuinely closed loop with no forklift abuse can run for many years and a great many trips.
The per-trip calculation
Divide. That is the entire method and almost nobody does it.
- Cost per trip is purchase price divided by the number of trips the pallet actually makes before it is lost, broken or retired.
- If a plastic pallet costs ten times what a wooden one does, it needs to make roughly ten times as many trips just to break even on cost, before counting handling, repair or return logistics.
- The same logic applies to embodied impact: a high up-front footprint is only repaid if the pallet keeps circulating.
A plastic pallet that makes hundreds of trips comes out ahead on both. The same pallet lost after a few trips is several times worse than any wooden option.
So the question is never "plastic or wood"
It is: what proportion of these pallets will I see again?
With a very high return rate, plastic economics work and the environmental case works too. In the middle it depends on the specifics. With a low return rate, plastic is a straightforwardly bad decision on both cost and impact, and the fact that the pallet *could* have lasted a decade is irrelevant if it left the building and never came back.
Where plastic genuinely earns it
Wet processing. Meat, poultry, produce, dairy. Wooden pallets absorb, harbour and eventually smell, and no amount of good intentions fixes that. This is the strongest case for plastic and it is not really about economics.
Regulated hygiene. Environments where particulate shedding or washdown requirements apply. Again, not an economic argument.
Tight closed loops. Plant to depot and back, same assets, high frequency, disciplined return. Here the arithmetic genuinely works.
Automation with unforgiving tolerances. Moulded pallets are dimensionally consistent in a way recycled wood is not, though Grade A wood often meets the spec at lower cost.
The reclaimed plastic exception
There is one case where the environmental argument for plastic improves a great deal: buying used.
A reclaimed plastic pallet, taken from a retired closed loop and re-graded, carries little added impact beyond transport. It is the most circular plastic pallet option. The catch is availability: used plastic stock depends on what has been recovered rather than what a mould can produce on demand, so supply fluctuates in a way wood supply does not. See plastic pallets and request a quote to see what partner suppliers have.
Plan the end of life
Whatever you buy, arrange the end of life at the start. Cracked and retired plastic pallets have value as regrind, and recyclers commonly take them in volume. A plastic pallet that ends in a landfill has spent a lot of resources to make roughly the same number of trips a cheap wooden pallet would have made. That is the outcome the whole calculation exists to avoid.
The honest summary
Material is not the variable. Return rate is. Work out your genuine return rate first (issues versus returns over twelve months, the actual number, not the estimate) and the pallet decision will make itself.

