RePallet Market

Compliance · 1 November 2026

Reading an IPPC stamp in ten seconds

Four elements, two placement rules, and one letter that should make you reject the pallet outright.

Ask about anything in this article

Send your question through the form and a partner supplier can follow up.

A working address — the quote comes back here.
US or Canada only.
US ZIP or Canadian postal code.
Whole units — per order, or per month if it’s recurring.

Your request goes to partner suppliers in our network so they can prepare a quote. See our privacy policy.

Rows of wooden pallets stacked high inside a warehouse

In short

A compliant IPPC mark carries the wheat symbol, a two-letter ISO country code, a facility registration number and a treatment code: HT for heat treatment, MB for methyl bromide. The mark must be applied after treatment and must appear on at least two opposing sides. An MB mark means the pallet was fumigated and should not enter a reuse stream.

If you handle export freight, you will look at more IPPC stamps than you will ever look at pallets deliberately. Here is everything the mark contains, in the order you should read it.

The four elements

1. The wheat symbol. A stylised ear of wheat inside a frame, on the left of the mark. It is the IPPC logo and it is the only part that is identical everywhere in the world. If it is absent, the mark is not an ISPM 15 mark regardless of what else is stamped on the wood.

2. The country code. Two letters, ISO 3166: US, CA, MX, CN, DE and so on. It identifies the country of the treatment facility, not the country the pallet or the goods came from. A pallet stamped CN that arrives from Germany is entirely normal; it was treated in China and has since travelled.

3. The facility registration number. A unique identifier issued by the country's national plant protection organisation to the facility that performed the treatment. In the United States this is administered through an accredited agency programme. The number is the audit trail: a treatment record should exist somewhere against it.

4. The treatment code. This is the one that matters most. HT means heat treatment: the wood reached 56°C at core for 30 continuous minutes. MB means methyl bromide fumigation. DH means dielectric heating, a newer approved method. DB may appear alongside, meaning debarked.

The two placement rules people get wrong

The mark must be applied after treatment. This sounds pedantic and it is a common compliance failure. A facility that stamps blanks and then treats them cannot demonstrate that any particular pallet went through the chamber. Inspectors know this and look for it.

The mark must appear on at least two opposing sides. One stamp is not compliant. The practical reason is that a pallet in a stack can only be inspected from the faces you can see, and an inspector who has to unstack a container to verify a mark will not be in a generous mood.

Both rules are in the standard, both are easy to comply with, and both are routinely missed by facilities operating at the margins of the programme.

The letter that should stop you

MB. Methyl bromide is an ozone-depleting substance being phased out under the Montreal Protocol. It is still an approved ISPM 15 treatment in some jurisdictions, and pallets treated with it still circulate.

If you are buying reclaimed pallet lumber from anybody for furniture, garden beds or anything a person will touch regularly, check for MB and walk away if you find it. Heat-treated wood is chemically untreated, because the treatment is literally heat. Fumigated wood is not. A partner supplier can tell you what treatment its stock carries; ask for the documentation.

What the mark does not tell you

Moisture content. Heat treatment is pest control, not drying. A compliant HT pallet can still be wet and grow mould in a sealed container on a long ocean transit. If your product is moisture-sensitive you want KD-HT and you have to ask for it specifically. See heat treated vs kiln dried.

Load rating. The mark says nothing about capacity, construction or grade.

Later repairs. The treatment does not expire. But if a pallet has been repaired with untreated components since it was stamped, the mark is no longer valid for that pallet, which is why repaired export pallets must be re-treated and re-stamped.

What is exempt

ISPM 15 applies to solid wood packaging over 6 mm thick. It does not apply to plywood, OSB, particleboard, veneer or LVL, because the manufacturing process for engineered products already destroys pests. It does not apply to plastic, metal or corrugated packaging.

This is why a well-designed export crate often uses a solid frame with sheet panels: it minimises the volume of solid wood that has to be treated.

If a shipment gets queried

Have the facility number and the treatment date ready, and ask the supplier for its treatment records. A compliant facility should be able to produce a batch record on request.

Outcomes for a non-compliant shipment range from mandatory treatment on arrival at your cost, through re-export, to destruction of the packaging and occasionally the goods. It is one of the cheapest compliance risks to eliminate and one of the most expensive to get wrong. If you are ever unsure, treat: a chamber cycle costs little against a rejected container. Check current regulations for the destination country before you ship.

Questions on this article

What if the stamp is illegible?

For export-destined pallets it needs re-treating and re-stamping. An illegible mark is a rejected shipment waiting to happen, and inspectors are not generous about it.

Can I check a facility number?

National plant protection organisations maintain registers of accredited facilities. If a number does not resolve, that is worth knowing before the container sails.

Do pallets need the stamp for Canada?

Check current rules, since requirements for bilateral US–Canada movement differ from overseas export. For most other destinations, ISPM 15 marking is expected.

ISPM 15exportstamps

Key points

  • Four elements: wheat symbol, country code, facility number, treatment code.
  • The mark must be applied after treatment, and applying it earlier is a common compliance failure.
  • It must appear on at least two opposing sides of the item.
  • HT means heat treated. MB means methyl bromide, which should be avoided.
  • The stamp says nothing about moisture content, which is a separate and expensive problem.
Pallets staged in front of loaded racking inside a warehouse

Filed under

Compliance

Published

Written by

RePallet Market Editorial
Pallet guides

Ready to put a number on it?

Send the footprint, the grade and the volume. We'll come back with price per unit and the first window we can hold.